Pine Sol is a terrific multi-surface cleaner that can be used for a wide variety of purposes and surfaces. But, you might be wondering, “Can you use Pine Sol on laminate floors?” After all, it’s known for its ability to cut through dirt, grime, and grease.

Pine-Sol was first introduced in 1929 as a cleaner and degreaser. It was originally made by dissolving pine oil in kerosene, but it is now made with synthetic ingredients. Pine-Sol is a registered trade name of The Clorox Company for a line of household cleaners. 

Pine-sol can be used to clean hardwood floors, countertops, toilets, and yes, laminate floors too!

 

How are laminate floors made?

First Step 630-Square Foot Roll Underlayment

Laminate floors are made by combining multiple layers of material together. The bottom layer is typically made of a backing material, such as plywood or fiberboard. The middle layer is a core material, which can be made of either high-density fiberboard (HDF) or medium-density fiberboard (MDF).

The top layer is a wear layer, which is a clear protective coating that helps to resist scratches, stains, and fading. These floors can be made to look like real wood floors, stone floors, or even ceramic tile floors.

The clear protective top layer, or laminate, is made from a material called melamine. Melamine is a synthetic resin that is derived from urea and formaldehyde. It is used in the manufacture of many products, including countertops, cabinets, flooring, and dishes.

 

How to use Pine Sol on laminate floors?

Pine-Sol All Purpose Cleaner, Original Pine, 40 Ounce Bottles (Pack of 2) (Packaging May Vary)

Pine-Sol is an excellent multi-surface cleaner product to clean laminate flooring. Using Pine-Sol on laminate will keep them looking shiny clean and smelling great for years to come.

When using Pine-Sol, it is important to dilute the solution as directed on the bottle. Use a soft cloth or pine sol spray mop to avoid scratching the floor. Pine-Sol is an effective cleaner for laminate floors and can help to keep them looking their best when you need to get in a good deep cleaning.

 

What is the best way to clean laminate floors?

Cleaning laminate floors can be a challenge, as they are susceptible to scratches and scuffs. In addition, laminate floors can be difficult to keep dust-free and streak-free. However, there are some tips and tricks that can help make cleaning laminate floors a bit easier.

For starters, it is important to sweep or vacuum the floor regularly to remove any dirt or debris.

As part of your weekly cleaning checklist, you should sweep or vacuum your laminate floors at least once a week to keep them clean and free of dirt and dust. If you have pets, you may need to sweep or vacuum more often to remove pet hair and other debris.

When sweeping or vacuuming laminate floors, use a soft-bristled brush attachment on your vacuum cleaner, and make sure to go over each section of the floor multiple times. If you are sweeping, make sure to use a stiff-bristled broom head for best results, and push the dirt and debris in one general direction and into piles.

The bigger the broom head, the more surface area you can cover and the shorter amount of time you will spend sweeping. You may also want to consider using a dust mop or damp cloth to help collect any dirt or debris your vacuum cleaner may have missed.

When it comes time to clean the floor, be sure to use a mild cleaner and avoid using abrasive scrubbers, as this can damage the laminate.

Harsh cleaners can damage laminate flooring by causing the surface to become dull, sticky, or discolored. In some cases, the cleaners can also cause the laminate to de-laminate, or peel away from the underlying material. To avoid these problems, it is best to use a mild cleaner specifically designed for laminate floors.

Abrasive scrubbers can damage laminate floors by scratching or dulling the surface of the floor. Abrasive materials such as sandpaper, steel wool, or abrasive pads can cause this type of damage. In addition, using harsh cleaners or scrubbing the floor too vigorously can also damage the laminate. If you do use an abrasive scrubber on your laminate floor, be sure to use a light touch and avoid using any harsh cleaners.

When mopping, be sure to use a damp mop rather than a soaking wet one, as too much water can also damage the laminate.

Laminate floors are designed to be resistant to water, but too much moisture can still damage them. Damp mops and mopping with too much water can cause the flooring to swell, warp, or discolor. In extreme cases, the laminate flooring can delaminate, meaning the layers of the flooring peel apart.

To avoid damaging your laminate floors, always use a damp mop instead of a wet one, and make sure to wring out the mop thoroughly before mopping. Also, avoid letting standing water sit on the floor for too long. If you have any spillages, clean them up as soon as possible. In addition, be sure to dry the floor thoroughly after mopping to avoid any water spots.

Finally, if there are any stubborn floor stains or marks on the floor, they can usually be removed with a little elbow grease and a bit of patience.

There are a few reasons why it can be difficult to remove tough stains and marks from laminate floors; the surface of laminate floors is very smooth, which can make it hard to scrub stains out, the material of laminate floors is porous, meaning that it can absorb liquids and dirt easily (this makes it harder to remove stains that have been allowed to sit for a while), and finally, the seams between laminate flooring boards can trap dirt and debris, making it difficult to clean them thoroughly.

To remove tough stains and marks from laminate floors, you will need to be patient and use some elbow grease. Try forcefully scrubbing the stain with a damp cloth or sponge. If this doesn’t work, you can try using a stronger cleaning solution, such as white vinegar or dish soap. You may need to apply the solution to the stain and let it sit for a few minutes before scrubbing it again. You can try sanding it off with fine-grit sandpaper if the stain is still not coming up.

If all else fails, there are many commercially available cleaners that are specifically designed for laminate floors.

There are a few reasons that commercial cleaners designed for laminate floors are effective. These cleaners are usually pH-neutral, which means they won’t damage the floor’s finish. Also, they often contain surfactants, which help to break down dirt and grime. And finally, they typically have a low foam level, so they won’t leave behind any residue.

Can You Use Pine Sol on Laminate Floors

What not to use to clean laminate floors

Abrasive cleaners, such as those containing ammonia, alcohol, or vinegar, can damage the laminate floor’s surface and should be avoided. In addition, harsh scrubbing in tandem with abrasive cleaners can also damage the laminate. If you must use an abrasive cleaner on your laminate floor, be sure to use a light touch.

As mentioned earlier, laminate floors are also susceptible to damage from water and moisture. Too much moisture can cause the flooring to swell, warp, or discolor. This will ruin the laminate flooring to the point that the only option available will be to replace them.

 

What kind of cleaner can you use on laminate flooring?

In addition to Pine-Sol, some of the most popular commercial cleaners for laminate floors that are available are:

  • Bona Laminate Floor Cleaner
  • Swiffer WetJet Wood Floor Cleaner
  • Black Diamond Wood & Laminate Floor Cleaner
  • Weiman Hardwood Floor Cleaner and Polish
  • Shark Steam and Spray Mop
  • OxiClean Versatile Stain Remover
  • Mr. Clean Multi-Surfaces Liquid Cleaner
  • Mrs. Meyers Multi-Surface Everyday Cleaner
  • Pledge FloorCare Wood Squirt & Mop
  • BISSELL Spinwave Powered Hardwood Floor Mop and Cleaner

 

What should you not use Pine Sol on?

While Pine-Sol is a great multi-purpose cleaner that can be used on a wide variety of surfaces throughout your home, especially hardwood floors, there are a couple of areas where it can actually be potentially harmful to use Pine-Sol.

Pine-Sol should not be used on unsealed wood surfaces, as it can damage the finish, as well as on carpet or upholstery, as it may leave behind a greasy residue.

The post Can You Use Pine Sol on Laminate Floors? appeared first on Millennial Homeowner.